What is New FRP Sheet?

Multilayer Continuous Fiberglass Reinforced Thermoplastic Sheets is a new FRP composite material made of continuous fiber as reinforcing material and thermoplastic resin as matrix through thermal lamination process.

1.2mm White Glossy PET Film FRP Sheet (1)

Structure of New FRP Sheet?

The number of layers of New FRP (Fiber Reinforced Polymers) Sheet is flexible and adjustable. It can be set to 2 to 9 layers according to specific needs, and up to 40 layers. The increase in the number of layers directly improves the strength performance of the sheet. The conventional design of the ply angle is 0°/90° alternating laying, or 45°/-45° (i.e. 45° and minus 45°) symmetrical laying to further optimize the structural strength and stability of the sheet.

new FRP Sheet Structure
decorative film for new FRP sheet

Decorative Film

PP/PVC/PET and other protective films can be selected,

thermoplastic ud tape for new FRP sheet

Thermoplastic UD Tape

Layers of UD tape: 2~9 layers, the number of layers can be customized.
Fibers: Continuous fiberglass.
Resin Types: Polypropylene (PP), polyethylene (PE), nylon (PA), polyphenylene sulfide (PPS), etc.
Additives: Antioxidant, UV stabilizer, Flame retardant agent, Custom color.

non-woven back

Non-woven Back

The non-woven fabric can promote the tighter adhesion of the CFRT sheet to other material systems.

Performance Parameter

Typical ProductDensity(g/cm3)E-Glass Fiber ContentThickness(mm)Areal Weight(g/m2)Tensile Strength(MPa)Tensile Modules(GPa)Color
UD-PP-300-601.560%0.230080028Natural or Black
UD-PP-370-601.560%0.2537085028Natural or Black
UD-PP-450-601.560%0.345090030Natural or Black
UD-PE-450-651.665%0.345085030Natural or Black
UD-PE-500-701.770%0.3550090030Natural or Black
UD-KPP-450-601.560%0.345075028Natural or Black
UD-ZRPP-450-601.560%0.345070028Natural or Black

Features of FRP Sheets

The density of FRP is only 1/4~1/5 of steel and 1/3~1/2 of aluminum.

High Strength

Compared with metal materials and thermosetting composite materials, it can absorb a larger amount of energy when it is impacted, and reduce the damage caused by impact.

Scratch Resistant

General impacts and scratches will not leave marks on its surface.

Corrosion Resistance

The protective film on the surface of CFRT can completely isolate moisture and general chemicals, which makes its surface easy to clean.

High Rigidity

The continuous fiberglass structure gives CFRT excellent toughness, and large bending deformation will not cause damage to its structure.

New FRP Foam Sandwich Panels

CFRT Sheet skin sandwich panel structure

FRP sheets can be composited with PP honeycomb, foam (XPS/PET/PU/PVC), etc., and are used in ships, RVs, vans, rail transit, construction, furniture, etc. One feature of FRP is that it can not only be composited with other core materials through adhesives, but can also be laminated with thermoplastic core materials through heat melting.

Customized FRP Sheet Solutions for Your Project

Laying Angles of UD Tape

  • 0°: This layup consists of fibers aligned parallel to the loading direction. It has high stiffness and strength in the load direction.
  • 0°/90°: This type of layup consists of two layers, one with fibers aligned in the 0° direction and the other with fibers aligned in the 90° direction. It provides good shear properties and is commonly used in applications where support of in-plane and out-of-plane loads is required.
  • +45°/−45°: This type of layup consists of two layers, one with fibers aligned at an angle of ±45°. It provides balanced in-plane properties.
laying angles of ud tape
resin system of ud tape
  • Different resin systems and fiberglass contents are used according to needs.
  • Provides composite testing.
  • Provide performance test reports.

FRP Sheet Samples

Our Advantage

International Advanced Production Equipment

We adopt independently developed automated thermoplastic production equipment standards to achieve high specifications, efficiency, high quality, high precision, safety, and environmental protection.

cfrt sheet roll

Premium Raw Materials

The plastic masterbatch and glass fiber yarn used in thermoplastic resin fully comply with the International Plastics Standardization Technical Committee and the pollutant emission standards of the glass fiber and products industry.It relies on electric heating to melt the resin and achieve fusion between UD tapes without producing any harmful gases.

new FRP sheet roll

High Specifications

The maximum thickness of thermoplastic sheets can reach 5mm, the maximum width can reach 2.8m, the length of each FRP sheet roll can reach 250m, and up to 10 layers of UD tapes can be thermally compounded. The thickness of thermoplastic honeycomb panels ranges from 6mm to 120mm.

High Efficiency

The production speed of thermoplastic composite panels reaches 3~8m/min, and 10,000m² FRP sheets or thermoplastic composite panels can be produced every day. The annual production capacity can meet the production demand of 80,000 box trucks.

Safe and Reliable

The heating and cooling of thermoplastic sheets are in a closed space, which keeps production in a stable temperature environment and also protects the safety of operator